NT2016SA-16.368000 MHZ-NTG1

Specification of Quartz Crystal Controlled Oscillators 1 NDK Part Number NT2016SA-16.368000 MHz-NTG1 2 Chipset Maker TEXAS INSTRUMENTS 3 Application GPS on mobile phone 4 Chipset Name NL5350 5 NDK Specification Number NSA0345B 6 Type NT2016SA 7 7.1 Rating Nominal Frequency (f nom) 16.368 MHz ( 3 digits marking without the decimal point: 163) 7.2 Supply Voltage +2.5 V +/-0.1 V DC (-Earth) 7.3 7.4 Current Consumption Output Voltage Max. 1.5 mA Min. 0.8 Vp-p Clipped sine wave (DC-Coupling) 7.5 Operable Temperature Range -30 to +85 °C 7.6 Storage Temperature Range -40 to +85 °C 7.7 Load impedance 10 kΩ // 10 pF 7.8 DC-cut Capacitor DC-cut capacitor of output is not put in TCXO. 8 Electrical specification 8.1 Frequency Stability Please add DC-cut capacitor (1000 pF) in output line. 8.1.1 Frequency / Temperature characteristics Max. +/-0.5 ppm / -10 to +70°C Max. +/-1.5 ppm / -30 to -10°C, +70 to +85°C (Based on frequency at +25 +/-2 °C) 8.1.2 Frequency temperature slope Max. +/-0.05 ppm/°C / -10 to +70°C Max. +/-0.1 ppm/°C / -30 to -10°C, +70 to +85°C (Minimum of one measurement every 2 °C) 8.1.3 Frequency / Voltage coefficient Max. +/-0.1 ppm / +2.5 V +/-0.1 V 8.1.4 Frequency / Load coefficient Max. +/-0.2 ppm / (10 kΩ // 10 pF) +/-10% 8.1.5 Frequency tolerance Max. +/-2.0 ppm (at +25 +/-2 °C, after 2times reflow soldering, based on nominal frequency) 8.1.6 Long-term Frequency Stability Max. +/-1.0 ppm / year 8.3 Short-term frequency stability Start-up time Max. 1.0 ppb (Tau=0.1s) Max. 2.0 ms (to 90% of output amplitude) 8.4 Stabilization Time Max. 2.0 ms (Within +/-0.5ppm of final frequency) 8.5 Harmonic distortion 8.6 8.7 Symmetry Phase Noise Max. -5.0 dBc 40 to 60 % 8.2 Max. -86 dBc/Hz (at 10 Hz offset) Max. -112 dBc/Hz (at 100 Hz offset) Max. -134 dBc/Hz (at 1k Hz offset) Max. -148 dBc/Hz (at 10k Hz offset) Max. -150 dBc/Hz (at 100k Hz offset) 9 Dimension of external (Unit: mm) Feb.17.2012